Skip to product information
1 of 4

MWR4X4

Performance Front Mount Intercooler Kit – Toyota Land Cruiser 100 Series 1HD-FTE (Direct-Fit Upgrade)

Performance Front Mount Intercooler Kit – Toyota Land Cruiser 100 Series 1HD-FTE (Direct-Fit Upgrade)

Regular price €726,00 EUR
Regular price Sale price €726,00 EUR
Sale Sold out
Taxes included. Shipping calculated at checkout.

Low stock: 5 left

Quantity

Please note: the superior high-flows shown in the photos do not come included with the intercooler, and are just shown for aesthetic purpose. They are sold separately.

This performance front mount intercooler kit is a direct-fit upgrade for the Toyota Land Cruiser 100 Series with the 1HD-FTE 4.2L turbodiesel engine. It replaces the restrictive factory intercooler and thin plastic/rubber charge pipes with a thicker, higher-capacity bar-and-plate core and 64 mm mandrel-bent aluminum piping

The result is:

  • Roughly double the intercooler volume compared to stock, and enlarged internal diameter throughout the intake tract. 
  • Lower intake air temperatures (IAT) and lower exhaust gas temperatures (EGT) under load, keeping the 1HD-FTE in a safer operating range when towing, off-roading, or running mild tuning.
  • More stable, consistent power delivery instead of heat-soaking on long climbs or high ambient temps. 

The kit is designed as a bolt-in solution and comes with the brackets, silicone elbows, breathers, clamps, and hardware you need. No guesswork. 

By improving charge-air cooling you’re feeding the engine denser, cooler air. That means better combustion, more reliable power, and less thermal stress on pistons, head gasket, and turbo hardware over time.

  • Heading
  • Heading
  • Heading
View full details

KEY FEATURES

  • Direct-fit front mount intercooler upgrade for Toyota Land Cruiser 100 Series with 1HD-FTE
  • High-flow bar-and-plate intercooler core, significantly larger and thicker than OEM (aftermarket 1HD-FTE cores typically move to ~600–675 mm x ~280–300 mm x ~76 mm, which is ~2–3× the stock volume/surface area)
  • 64 mm aluminum charge pipes replace the weaker, longer, restrictive factory plastic/rubber pipes (stock ~55 mm → upgrade 64 mm).

SPECS

  • Charge piping diameter: 64 mm aluminum (factory is ~55 mm plastic/rubber, so you get a larger, straighter path)
  • Includes: mounting brackets, breathers/hoses, silicone elbows, hardware.